Changing The Handset Name - Panasonic KX-TG6591E Operating Instructions Manual

TG6591E(e).book Page 34 Friday, August 20, 2010 9:29 AM
Programming
Changing the start and end time
1
8 i {#}{2}{3}{7}
2
Continue from step 3, "Turning night
mode on/off", page 33.
Setting the ring delay
This setting allows the handset to ring
during night mode if the caller waits long
enough. After the selected amount of
time passes, the handset rings. If you
select "No Ringing", the handset
never rings during night mode.
1
8 i {#}{2}{3}{9}
2
{V}/{^}: Select the desired setting.
i M i {ic}
Note:
L When the answering system answers
the call, this feature does not work.

Changing the handset name

Each handset can be given a
customised name ("Bob", "Kitchen",
etc.). This is useful when you make
intercom calls between handsets. You
can also select whether or not the
handset name is displayed in standby
mode. The default setting is "Off". If
you select "On" without entering any
handset name, "Handset 1" to
"Handset 6" is displayed.
1
8 i {#}{1}{0}{4}
2
Enter the desired name (max. 10
characters; page 48).
L If not required, go to step 3.
3
M
4
{V}/{^}: Select the desired setting.
i M 2 times
5
{ic}
34
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Incoming call barring (Caller
ID subscribers only)
This feature allows the unit to reject calls
from specified phone numbers that you
do not want to answer such as junk calls.
When a call is received, the unit does not
ring while the caller is being identified. If
the phone number matches an entry in
the call barred list, the unit sends out a
busy tone to the caller, and then
disconnects the call.
Important:
L When the unit receives a call from a
number that is stored in the call barred
list, the call is logged in the caller list
(page 37) with 7 after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in
the call barred list by using the caller list
or by entering the numbers directly.
Important:
L You must store the phone number
with an area code in the call barred
list.
■ From the caller list:
1
8
2
{V}/{^}: "Caller List" i
M
3
{V}/{^}: Select the entry to be
barred. i I
4
{V}/{^}: "Caller Barred" i
M
5
{V}/{^}: "Yes" i M i
{ic}
■ By entering phone numbers:
1
8 i {#}{2}{1}{7} i m
2
Enter the phone number (24
digits max.). i M
L To erase a digit, press ^.
3
{ic}