One-Touch Arming; Auto-Arming; One-Touch Bypass Programming - Paradox K636 User Manual

One-Touch Arming

One-Touch arming allows you to arm the system without using a user code. This feature must be enabled by
your installer. If One-Touch Arming is programmed, you can increase the security level of your system (from
Disarm Stay Arm
One-Touch Regular Arming
Press and hold the [
ARM
this feature to allow specific individuals like service personnel (e.g. cleaners) to arm without giving them access
to any other alarm system operations. See Regular Arming on page 10.
One-Touch Stay Arming
Press and hold the [
STAY
One-Touch Sleep Arming
Press and hold the [
SLEEP

One-Touch Bypass Programming

Press and hold the [
BYP
Fast Exit
When the system is already Stay or Sleep armed: this feature will allow you to exit already armed premises and
keep the system armed. Press and hold the [
the system will switch to its previous arming mode.

Auto-Arming

Timed Auto Arming
The alarm system can automatically arm itself at a specified time every day. As with Regular arming (see
Regular Arming on page 10), the system will bypass any open zones.
How do I program the Auto-Arm Timer?
1 Press the [ ] key.
2 Enter [
MASTER CODE
3 Press the [ ] key. The [
BYP
4 Press key [1] to set partition 1, or press key [2] to set partition 2.
5 Enter the desired time for auto arm (24 hour clock, e.g. 18:30).
6 Press key [1] to regular arm, key [2] to sleep arm, or key [3] to stay arm the partition.
Esprit E55
Sleep Arm Full Arm) without a code. See Figure 1 below.
] key to arm all zones in the partition. If partitioned, keys [1] & [2] will flash. You can use
] key to arm the perimeter (no Stay zones). See Stay Arming on page 11.
] key to arm all zones not defined as Sleep zones. See Sleep Arming on page 10.
] key to access Bypass programming mode. See Bypassing a Zone on page 13.
OFF
Figure 1: Arming / Disarming
To Sleep Arm:
[
SLEEP
To Disarm:
[ ] + Code
OFF
To Disarm:
[
OFF
].
] key will flash.
BYP
] key for to start the exit delay. After the exit delay has elapsed,
ARM
] + Code No Code
SLEEP
No Code
No Code
STAY
No Code
] + Code
OFF
To Stay Arm:
[ ] + Code
STAY
To Disarm:
[ ] + Code
OFF
12