One-Touch Arming - Paradox Spectra 1686H User Manual

4.7 O -T
NE OUCH
One-Touch Arming allows you to arm the system without
using an access code.
NOTE2: If both partitions are enabled and you activate a
One-Touch feature, buttons [1] and [2] will flash. Press
the button corresponding to the desired partition(s).
4.7.1 One-Touch Regular Arming
Press and hold the [
arm all zones in the partition. You can use this feature to allow
specific individuals like service personnel (i.e. cleaners) to arm
without giving them access to any other alarm system
operations. For details on Regular Arming, refer to section 4.3.
4.7.2 One-Touch Stay Arming
Press and hold the [
arm all zones not defined as Stay Zones. For details on Stay
Arming, refer to section 4.4.
4.7.3 Fast Exit
WHEN THE SYSTEM IS ALREADY STAY ARMED
you to exit already armed premises and keep the system armed.
Exit and Stay Arm: Press and hold the [
(see Note2) to start the Exit Delay (see section 4.1). When the Exit
Delay elapses, the system will return to Stay Arming.
Exit and Regular Arm: Press and hold the [
seconds (see Note2) to start the Exit Delay (see section 4.1).
When the Exit Delay elapses, the system will switch to Regular
A
RMING
] button for 3 seconds (see Note2) to
ENTER
] button for 3 seconds (see Note2) to
STAY
: this feature will allow
] button for 3 seconds
STAY
] button for 3
ENTER
Spectra LED Keypads 23