Table of Contents
Advertisement
SETTINGS
his menu allows you to set up your mobile phone as per your own preference.
T
Tones
Alert mode
You can set the ring, alert and alarm tone types via the Mode menu.
If you select the 'Vibrate' or 'Vibrate then ring' option, the vibrating option replaces all the alert and alarm tones.
To modify the alert mode:
1
Press the [Menu/T9] key. Select Settings.
2
Select Tones.
3
Select Mode.
4
Select one of the available settings (Ring, Silent, Vibrate,
ring) and press
or:
1
From the standby display, press the [Up] arrow key.
2
Select one of the available settings (Ring, Silent, Vibrate,
ring) and press
1. If the Alert mode is set to Silent, the
2. If the Alert mode is set to Vibrate, Vibrate & ring or Vibrate then ring, the
Standby display.
3. When the phone is connected to either the Desk Top Charger, HF kit, CLA or AC adaptor, the vibrator
mode selection is temporarily inhibited and the phone rings instead of vibrating.
Ringtone selection
You can select a melody, a speech note or a music file from the available ring tones stored in
the phone.
1
Press the [Menu/T9] key. Select Settings.
2
Select Tones.
3
Select Ringtones.
4
Select
Incoming
or
Welcome melody
display is displayed) or
plays).
5
Scroll up or down to listen to the different ringtones. Select one by pressing OK.
6
Select
Save
to store your settings.
1. When scrolling up or down, wait for a few seconds for the selected melody to be played (except when on
Silent mode).
2. The 'No sound' item may be selected to deactivate the Welcome and Goodbye melodies.
3. You can set a ringtone for each of your phone book cards (please see "Setting a melody, a music or a
speech note as a ringtone", page 47). This ringtone is played on receipt of an incoming call.
4. You can only choose a melody, a speech note or a music while selecting a ringtone for your incoming call,
incoming call L2 or alarm.
Volume adjustments
The ring tone, key tones, conversation and alarm tones (alarm clock, diary alarm and low bat-
tery alarm) audio levels can all be individually set via the Settings menu:.
1
2
OK
to validate.
OK
to validate.
icon is displayed on the Standby display.
call,
Incoming call
L2,
(On switching on the phone, a welcome melody plays before the Standby
Goodbye melody
Press the [Menu/T9] key. Select Settings.
Select
Tones
.
Vibrate & ring
Vibrate & ring
Alarm
(then select Melodies, Music, Speech notes)
(on switching off the phone, a Goodbye melody
Settings
94-
or
Vibrate then
or
Vibrate then
icon is displayed on the
Advertisement
Table of Contents
