Table of Contents
Advertisement
SETTINGS
T
his menu allows you to adjust the features on your mobile to your own
convenience and to ensure the security of the phone.
Tones
Alert mode
You can set the ring, alert and alarm tone types via the Mode menu.
If you select the 'Vibrate' or 'Vibrate then ring' option, the vibrating option replaces all the alert and alarm tones.
To modify the alert mode:
1
Press OK. Select Settings.
2
Select Tones.
3
Select Mode.
4
Select one of the available settings (Ring, Silent, Vibrate,
ring) and press
1. You can access the Mode menu directly from the standby display by pressing the up arrow key
2. If the Alert mode is set to Silent, the
3. If the Alert mode is set to Vibrate, Vibrate & ring or Vibrate then ring, the
Standby display.
4. When the phone is connected to either the Desk Top Charger, HF kit, CLA or AC adaptor, the vibrator
mode selection is temporarily inhibited and the phone rings instead of vibrating.
Ringtone selection
You can select a melody from the available ring tones stored in the phone.
1
Press OK. Select Settings.
2
Select Tones.
3
Select Ringtones.
4
Select
Incoming
mobile, a welcome melody plays before the Standby display is displayed) or
(on switching off the mobile, a Goodbye melody plays).
5
Scroll up or down to listen to the different ring tones. Select one by pressing OK.
6
Save
Select
to store your settings.
1. When scrolling up or down, wait for a few seconds for the selected melody to be played (except when on
Silent mode).
2. The 'No sound' item may be selected to deactivate the Welcome and Goodbye melodies.
Volume adjustments
The ring tone, ramping, key tones, conversation and alarm tones (alarm
clock, diary alarm and low battery alarm) audio levels can all be individually
adjusted via the Settings menu:
OK
to validate.
icon is displayed on the Standby display.
call,
Incoming call
Vibrate & ring
L2, Alarm,
Welcome melody
Settings
59-
or
Vibrate then
.
icon is displayed on the
(On switching on the
Goodbye melody
Advertisement
Table of Contents
