Technical Specification; Installation Considerations - Hans Grohe Allegro E 14801XX1 Installation Instructions Manual

English
HighArc Bar Faucets
06688XX0
06696XX0
06699XX0
06857XX0
Allegro E 14801XX1
see page 5

Technical Specification

Recommended water pressure
Recommended hot water temp.
Hole size in mounting surface
Max. mounting surface thickness
Max. flow rate
*Please know and follow all applicable local codes when setting the temperature on the water heater.

Installation Considerations

• For best results, Hansgrohe recommends that this unit be installed by a licensed, profes-
sional plumber.
• Please read over these instructions thoroughly before beginning installation. Make sure
that you have all tools and supplies needed to complete the installation.
• The hot and cold supply hoses connect to the stops with 3/8" compression fittings
(included).
• Flush the hot and cold supplies thoroughly before installing this faucet. Debris in the
water line may damage the ceramic cartridge.

Solaris E
Stratos E
Metro E
Talis S
14.7 - 7.5 PSI
10° - 140° F*
1-1/"
 3/8"
. GPM