English Symbol description Safety Notes Do not use silicone containing acetic acid! Gloves should be worn during installation to prevent crushing and cutting injuries. Adjustment (see page 6) The hot and cold supplies must be of equal To adjust the hot water limiter. Using a hot water pressures. limiter in combination with a continuous flow water Installation Instructions heater is not recommended. • Prior to installation, inspect the product for Maintenance (see page 7) transport damages. After it has been installed, no transport or surface damage will be honoured. The check valves must be checked regularly • The pipes and the fixture must be installed, according to EN 806-5 in accordance with national flushed and tested as per the applicable or regional regulations (at least once a year). standards. Cleaning (see page 7) • The plumbing codes applicable in the respective countries must be observed. Dimensions (see page 12) Technical Data Flow diagram (see page 13) Operating pressure: max. 1 MPa ...
English Cleaning Recommendation for Hans- • After cleaning rinse thoroughly with clean water to remove any cleaner residue. grohe Products • The use of steam cleaners is not permitted. The Today, modern sanitary and kitchen tapware, high temperatures can damage the products. showers, accessories, washstands, tubs and radiators Important consist of very different materials to comply with the...