Miele EGW 2060 Operating And Installation Instructions page 5

Hide thumbs Also See for EGW 2060:
Table of Contents

Advertisement

During installation, maintenance
and repair work, the appliance
must be disconnected from the mains
electricity supply. The appliance is only
completely isolated from the electricity
supply when:
– the mains fuse is withdrawn,
– or the screw-out fuse is removed (in
countries where this is applicable),
– or it is switched off at the isolator or
at the wall socket and the plug
removed.
Ensure that current is not supplied to
the appliance while maintenance or
repair work is being carried out.
Warning and Safety instructions
Correct usage
This appliance complies with all
relevant legal safety requirements.
Incorrect use can lead to personal
injury and damage to property.
To avoid the risk of accidents and
damage to the appliance, you
should read these operating
instructions carefully before using it for
the first time. They contain important
notes on safety, operation and care.
This appliance is intended for
domestic use only to warm plates,
dishes and other crockery.
Any other usage is not supported by
the manufacturer and could be
dangerous. The manufacturer cannot
be held liable for damage caused by
incorrect or improper use of the
appliance.
Depending on the temperature
selected and the length of time the
appliance is being used, the inside of
the drawer can get extremely hot
during use, and remain hot for some
time after being switched off.
To avoid burning yourself, use oven
gloves when removing crockery
from the drawer. However, do not let
oven gloves get damp or wet, as this
causes heat to transfer through the
material more quickly with the risk of
scalding or burning yourself.
To minimise the risk of burning
yourself on the inside of the drawer,
always pull it out as far as it will go
before removing crockery.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents