Installation, repair and mainten- ance work should be by a Miele SAVE THESE INSTRUCTIONS! authorized service technician. Work by unqualified persons could be dangerous and may void the warranty.
Do not store anything in the these applications. Please contact the warming drawer. Forgotten items nearest Miele Dealer or Technical could melt or catch fire when the Service with specific requirements. appliance is turned on. Flammable liquids and materials should never be stored in or above the warming drawer.
To prevent injuries, do not use dishes. accessories not recommended by Do not place food in unopened Miele. containers in the warming drawer. Before cleaning the appliance, trip Pressure may build up and cause them the circuit breaker and allow the to explode.
IMPORTANT SAFETY INSTRUCTIONS General notes When using kitchen appliances near the warming drawer, make Children should not be left alone or certain that the power cords do not unattended in an area where an come in contact with or get caught in appliance is in use.
Guide to the controls Timer The warming drawer is operated by the timer, the temperature selector and the The timer activates the heating humidity control. elements and circulation fan. To warm The controls are only visible when the food the timer must be turned to an drawer is open.
Guide to the controls Temperature selector The temperature can be set on or between the "Low", "Medium" and "High" settings. The temperature settings: – Low: 140 °F (60 °C) – Medium: 176 °F (80 °C) – High: 203 °F (95 °C)
Guide to the controls Humidity control – : This position closes the vents and seals the moisture in the drawer The humidity control adjusts the to keep food moist and soft. humidity within the drawer. The humidity Condensation may occur around the control can be set anywhere between inside edge of the drawer.
Guide to the controls Temperature And Humidity Suggestions Food Temperature Humidity control Covered / Uncovered Bacon Medium Uncovered Beef Medium / Well Medium Moist Covered Beef Rare Moist Covered Bread hard roles Medium Uncovered Bread soft rolls Medium Moist Covered Bread proofing "0"...
Loading the warming drawer The drawer load will depend on the The rack can be inserted in three type and size of your dishes. positions: middle, left or right. The maximum load is 33 lbs (15 kg). Do not rest heavy items on the drawer.
Loading the warming drawer Tips Please note: Be careful not to place – To keep different foods hot, set the food too close to the upper heating temperature for the food requiring element. Increased temperature and the highest temperature setting. proximity may cause a fire! Place the food needing the highest setting on the rack and the other...
Using the food warmer ^ If necessary adjust the settings. Keeping food warm ^ Close the drawer. For best results, preheat the warming drawer before warming food. Keep the drawer closed while in use to ^ Open the drawer. prevent food from drying out. Remem- ber, food may continue to cook while ^ Turn the timer to the desired time being warmed in the drawer.
Using the food warmer Prewarming the dishes Food and dishes can also be warmed simultaneously. The warming drawer can also be used to warm dishes. Do not preheat the Keep in mind that the temperature drawer before warming dishes. setting to keep food warm may be higher than the temperature required to Only use heat resistant dishes.
Warming drawer care Appliance front and control , CAUTION: Before servicing, panel disconnect the power supply by ^ All external surfaces and controls can either removing the fuse, shutting off be cleaned with warm water and the power main or manually liquid dish soap applied with a "tripping"...
Warming drawer care Drawer Non-slip mat The drawer can be removed for easier Clean the non-slip mat by hand with cleaning. warm water and liquid dish soap. Only put the non-slip mat back in the Removing the drawer drawer when it is completely dry. The non-slip mat is not suitable for cleaning in a washer or dishwasher.
Frequently asked questions ,Repairs should only be carried out by a qualified and trained person in accordance with local and national safety regulations. Unauthorized repairs could cause an injury or machine damage. Some minor problems can be fixed without a service call. What if the drawer does not heat? Possible fault There is no power to the warming...
Technical Service In the event of a fault which you cannot easily fix yourself, please contact: – Your Miele Dealer – The Miele Technical Service Department USA 1-800-999-1360 email@example.com CDN 1-800-565-6435 firstname.lastname@example.org When contacting Technical Service please quote the serial number and model of the warming drawer.
Help protect our environment Disposal of the packing Disposal of an old appliance materials Old appliances may contain materials that can be recycled. Please contact The cardboard box and packing your local recycling authority about the materials protect the appliance during possibilty of recycling these materials.
Electrical connection Power supply CAUTION: Before servicing, This appliance is equipped with a 5 ft disconnect the power supply by (1.5 m) long power cord with a either removing the fuse, shutting off three-prong grounding plug ready for the power main or manually connection to a 120 V, 15 A, 60 Hz "tripping"...
Installation Installation tips Steam from the vents can damage – The warming drawer should be the cabinetry to the warming drawer. placed at a convenient height for easy access. A minimum 2" (5 cm) gap must be – The drawer should be installed clear allowed between the upper edge of of drafts caused by open doors and the warming drawer and the...
Installation ^ Push the casing in the cabinetry. Installing the warming drawer ^ Remove the drawer from the casing before installing the appliance in the cabinetry. Removing the drawer ^ Secure the casing in the cabinetry with the six screws. Inserting the drawer ^ Pull out the telescopic skies from the ^ Pull the drawer completely out and...
Installation a Install a handle to the custom front Integrated installations panel using counter sunk screws. Models 700-25 FB / 760-25 FB b Remove the drawer from the casing. Custom made front panels can be See "Removing the drawer". installed with models 700-25 FB and 760-25 FB.
Installation f Press the custom panel tight on to h Hook the panels into the bottom on the removed panel. and secure at the top with two screws making sure the seal is seated correctly. g Screw the removed panel to the custom panel with the eight screws.
Alteration rights reserved / 3103 M.-Nr. 05 857 820 / 02 This paper has been bleached without chlorine.