Cleaning And Care; Appliance Front And Control Panel - Miele EGW 2060 Operating And Installation Instructions

Cleaning and care

Appliance front, control panel
and interior
^ All surfaces and controls should be
cleaned using warm water with a little
washing up liquid applied with a soft
sponge or cloth.
^ Wipe the surfaces dry using a soft
cloth.
Allow the appliance to cool down to
a safe temperature before cleaning.
E-cloth
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
which is suitable for cleaning surfaces
such as stainless steel, glass, plastic
and chrome without the use of
chemicals.
To prevent the risk of scratches and
damage to the surface structure of
glass, stainless steel and aluminium
fronted appliances, pay particular
attention to the following cleaning
instructions.
12
Aluminium fronts
Aluminium is affected by the way that
light falls on it, by the surrounding
environment and by the angle you
observe it from.
Aluminium surfaces and controls
may suffer discolouration or damage
if soiling is left on them for too long.
Remove any soiling straight away.
The appliance front is susceptible to
scratches and abrasions.
Avoid:
– cleaning agents containing soda,
acids or chlorides,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
– stainless steel cleaners,
– cleaning agents containing
descaling agents,
– dishwasher detergent,
– oven sprays.