IMPORTANT SAFETY INSTRUCTIONS This appliance is intended for residential use only. Only use the appliance for its intended purpose. Improper use of the appliance can lead to personal injury and material damage. The manufacturer cannot be held responsible for damages caused by improper use of the plate warmer.
Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty. Hardwiring the appliance should be performed by a certified electrician in compliance with all local and national codes and requirements.
^ Clean the plate warmer with a damp cloth and wipe dry. ^ Heat the empty plate warmer for a minimum of 2 hours. Turn the temperature selector to "Maximum" (see "Selecting a temperature"). ^ Vent the room when heating the drawer for the first time.
The plate warmer is only intended for warming dishes. Do not use the plate warmer to reheat, cook or keep food and drinks warm. Condensation from food and drinks may cause moisture damage to the appliance. Use pot holders when removing dishes.
Operating ^ Place the dishes in the drawer. ^ Select a temperature. ^ Turn the appliance on (j). The button will light. ^ Close the drawer. The drawer may open again if closed too forcefully. ^ Turn the appliance off (k), before removing the warmed dishes.
Warming times Various factors will affect the warming times: – type and thickness of dishes, – quantity, – how dishes are arranged, and the – temperature setting. As you use the plate warmer you will learn which settings suit your needs best.
Cleaning the plate warmer Let the drawer cool before cleaning. Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the plate warmer. They will damage the surface. The exterior of the plate warmer can be cleaned with warm water and liquid dish soap applied with a soft sponge.
Frequently asked questions Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or machine damage. The manufacturer cannot be held responsible for unauthorized work. Why are the dishes not warm enough? Possible fault The appliance is turned off.
In the event of a fault which you cannot correct yourself contact the Miele Technical Service Department. 1-800-999-1360 firstname.lastname@example.org 1-800-565-6435 email@example.com When contacting Technical Service, please quote the model and serial number of your appliance both of which are shown on the enclosed data plate.
Help protect our environment Disposal of the packing material The transport and protective packing materials are environmentally safe for disposal and may be recycled. Ensure that any plastic wrap is disposed of safely and kept out of the reach of children. Danger of suffocation! Please recycle.
However, under certain conditions it may be possible for an installation in these applications. Please contact the Miele Technical Service Department with specific requirements. Built-in measurement The appliance is available in two...
Installation Installing the appliance ^ Set the plate warmer into the niche, push it all the way in and align it at a right angle. ^ Open the drawer and fix the appliance with the two supplied screws at the side panels of the cabinet.
Aligning the appliance front After installing the combination appliance it might be necessary to align the appliance front and/or to even the gap between the plate warmer and the combination machine. Flat washers are supplied beneath the knurled nuts, which fix the drawer to the telescopic runners.
Installation Electrical connection The electrical installation instructions for any appliance installed in combination with the plate warmer must be observed. When another appliance is installed in combination with the plate warmer to the same circuit breaker, operating both appliances at the same time may cause an overload.
All rights reserved/1206 M.-Nr. 06 543 300 / 01 en - US...