Non-Slip Mat - Miele EGW 2060 Operating And Installation Instructions

Stainless steel fronts
The appliance front is susceptible to
scratches and abrasions.
Stainless steel surfaces can be cleaned
using a proprietary non-abrasive
cleaning agent designed specifically
for use on stainless steel.
N.B. Do not use stainless steel
cleaning agents on the controls.
Avoid:
– cleaning agents containing soda,
acids or chlorides,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents.
To help prevent re-soiling, proprietary
conditioning agent for stainless steel
can also be used.
Apply sparingly with an even pressure
following the direction of the grain.
Cleaning and care

Non-slip mat

The non-slip mat can be removed from
the drawer for cleaning.
The mat is best cleaned by hand using
warm water with a little washing-up
liquid. Dry it thoroughly. Do not put the
non-slip mat back into the drawer until it
is completely dry.
13