Problem Solving Guide - Miele EGW 2060 Operating And Installation Instructions

Problem solving guide

Installation work and repairs to
electrical components of this
appliance must only be carried out
by a suitably qualified and
competent person in accordance
with local and national safety
regulations. Repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
unauthorised work.
Some minor problems can be dealt with
as follows:
What to do if . . .
. . . the crockery is not warm enough.
Check whether,
– the appliance has been switched on.
– the correct temperature setting has
been selected.
– the crockery has been allowed to
heat up for a sufficiently long time.
Various factors will affect how long the
crockery will take to heat up, for
example:
– the material and thickness of the
crockery
– the quantity
– how the crockery is arranged
– the temperature setting.
The times quoted are only guidelines.
As you use the plate warmer you will
get to know which setting suits your
own needs best.
14
. . . the crockery does not heat up.
Check whether,
– the mains fuse has blown.
If any of the following problems occur,
the advice of a qualified electrican or
the Service Department must be
sought.
. . .The crockery is too hot.
The temperature control is faulty.
. . . the On/Off switch does not light
up when the appliance is switched
on.
The indicator light for the switch is
defective.