Connection Check - Panasonic Diga DMR-PWT500 Operating Instructions Manual

Settings
When you experience problems with
settings
∫ Wireless Settings
≥If there is no problem, the following screen is
displayed.
Wireless Settings
Complete.
Network name
( SSID )
Wireless type
Authentication type
Encryption type
Reception
For better performance of Home Network (DLNA), it is
recommended using a wireless access point
compatible with 802.11n (5GHz).
Press OK to check network connection.
OK
≥If there is any problem, the following message is
displayed on the screen.
Display
A conflict with other
devices occurred.
A time out error
occurred.
An authentication
error or a time out
error occurred.
A device error
occurred.
16
VQT3C81
:
:
:
:
:
Check the following
≥Please wait a few
moments, and then try
again.
≥Setting of the Wireless
router for MAC Address
etc.
≥The signal may be weak.
≥The SSID and the
encryption key of the
Wireless router.
≥Please wait a few
moments, and then try
again.
≥If there is no improvement
in symptom, contact your
dealer.
∫ Network Easy Setting ( Home Network

Connection Check )

≥If there is no problem, the following screen is
displayed.
e.g., "Wireless" connection
Network Easy Setting ( Home Network Connection Check )
Completed.
1. Wireless setting : Pass
2. IP address setting : Pass
3. Connection to gateway : Pass
Network connection check has finished.
Press OK.
OK
≥If there is any problem, the following message is
displayed on the screen.
Display
1. LAN cable
connection or
Wireless setting:
2. IP address
setting:
3. Connection to
gateway:
1. LAN cable
connection or
Wireless setting:
2. IP address
setting:
3. Connection to
gateway:
1. LAN cable
connection or
Wireless setting:
2. IP address
setting:
3. Connection to
gateway:
1. LAN cable
connection or
Wireless setting:
2. IP address
setting:
3. Connection to
gateway:
Check the
following
≥Connection of
"Fail" the LAN
cables (
≥Settings of
"Fail"
the hub and
router
"Fail"
≥Connection
"Pass" and settings
of the hub
and router
"Fail"
≥Settings of
"IP Address /
"Fail"
DNS
Settings"
( 83)
"Pass"
"Pass"
"Fail"
"Pass"
"Home
network
available"
"Fail"
12)