Connection - Panasonic DMR-UBS90 Operating Instructions Manual

Blu-ray disc recorder
Hide thumbs Also See for DMR-UBS90:
Table of Contents

Advertisement

Connection

3D programmes or 4K images can be played back when this unit is connected to 3D or 4K
compatible terminal of a 3D or 4K compatible TV.
• Before making any connections, please disconnect all the units from AC power.
(Connect the AC mains lead after making all connections.)
• Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
• When the unit is not to be used for a long time
To save power, unplug it from the household mains socket. This unit consumes a small amount of
power, even when the unit is in standby mode. (
∫ Enjoying 4K output
• To enjoy images in 4K (50p/60p), you need an HDMI cable that supports 18 Gbps.
When outputting 1080p or 24p (4K) signal, please use HDMI cables 5.0 meters or less.
It is recommended that you use Panasonic's HDMI cable.
• If you connect this unit to a 4K-compatible TV and perform "Easy Setting", 4K (50p/60p) will be
automatically selected. (
• To view broadcasts, programmes or Ultra HD Blu-ray content in 4K/HDR format, connect the unit to
the HDMI terminal of a TV that supports HDCP2.2, 4K (50p/60p) 4:4:4, and HDR signals that meet
these standards.
• To watch HLG broadcasts in their original picture quality, connection to an HLG-compatible TV is
required.
∫ To enjoy broadcasts, programmes or Ultra HD Blu-ray discs that support HDR
(High Dynamic Range)
If you see a message about compatibility with HDR during playback of a broadcast, programme or
Ultra HD Blu-ray disc, please check your TV settings as follows:
Typically, the message will inform you that this unit is not connected to a TV compatible with HDR.
1 If you are using a Panasonic TV compatible with 4K and HDR released in 2015 or 2016,
(DX900/DX800/DX780/DX750/DX730/DX700 series etc.), please check your TV settings as
follows.
- Switch the TV to the HDMI input.
- Press "MENU" button of your TV remote control
- Select "HDMI HDR Setting" in "Setup"
- Select "On" in "HDMI HDR Setting"
2 If you use a TV not from Panasonic, compatible with 4K and HDR, please refer to the operating
instructions of the TV.
3 When you play back a HDR broadcast, programme or disc on a TV without HDR capability, the
broadcast, programme or disc can be played back (in non-HDR quality) even if the message
appears.
112)
21)
11
TQBS0033

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmr-ubc90Dmr-ubc90egk

Table of Contents