Main Unit - Panasonic DMR-UBT1 Operating Instructions Manual

Main unit

Front

1 Disc tray
2 USB port ( DC 5 V 900 mA)
• This port supports USB 3.0 Super Speed.
• For playback of 4K videos stored on a USB
device, use port on front of the unit.
3 SD CARD slot
• When removing the SD card, press on the
centre of the card and pull it straight out.
• For playback of 4K videos stored on an SD
card, use an SD card conforming to Class 10
of the SD Speed Class Rating.
Inserting or removing media
∫ Disc
Disc
• When inserting the media, ensure that it is facing the right way up.
• About SD card/USB device
- While writing to/reading from the media, do not switch the unit to standby mode or remove the media. Such action may
result in loss of the media contents.
- The USB port on the front side does not support USB HDDs. Connect a USB HDD to the USB port on the rear side.
( 34, Connecting the USB HDD)
6
TQBS0146
 
Pull to flip down
the front panel.
 

4 Display ( 7)
5 Remote control signal sensor
• Angle: Approx. 20° up and down, 30° left and right
• Distance: Within approx. 7 m in front of the unit
6 Open/close disc tray
7 Standby/on switch
Touch to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
These icons work just by touching the icons.
§
Do not place any objects on or around the icons.
∫ SD card/USB device

§
§
(Í/I)