Operation; Control Panel - Market Forge Industries Standard Depth 8100 Owner's Manual

Control Panel

ITEM PART NO. DESCRIPTION FUNCTION
1 93-5035 Lexan Decal
2 93-5037 Thermostat
Control Knob
3 93-5039 Fan Switch
4 93-5038 Light Switch
5 93-5040 Power Switch Three position switch –
6 93-5041 Timer
7 93-5036 Burner
Switch
1. Check that power is available to the oven
2. Arrange shelf positions according to the item to be cooked.
3. Close doors. Move fan switch to HIGH or LOW. Fan should come on.
4. Set thermostat dial to desired cooking temperature. Heat indicator
light should come on
5. Allow oven to preheat for about 5-10 minutes. Preheating is
complete.
6. Load oven. The load should be adjacent to the oven, so the doors
will be open as short a time as possible.
7. Close doors. Set timer for desired cooking time.
8. Buzzer will sound at end of preset interval. Oven is ready to unload.
9. If oven temperature is to be lowered, set the thermostat to the desired temperature to cool
interior. Press the cool down switch. The fan will continue to run with no heat.
10. This will help cool down the cooking compartment more rapidly.
11. For daily shutdown, place oven thermostat and power switch in OFF position. For extended
shut- down, leave doors ajar as well.
12. To view product while cooking press the momentary light switch. (see item 4).

OPERATION

Easy to clean surface.
Regulates oven
temperature controls
heating element
operation.
Two position fan switch.
Controls fan speed either
high or low.
Momentary switch.
on, off, cool down.
60-minute timer.
Indicates when
thermostat is calling for
heat and the heat or
burners are on.
13
7
QTY.
1
1
1
2
1
1
1
1
4
1
3
5
6