Table of Contents
Advertisement
H) BEATER BAR CLEANING
Clean beater bar after every five uses and every time the belt is replaced.
1 1
MC-UL424
Remove lower plate (See BELT REPLACEMENT, pages 17, 18).
Cut off any hair, thread, string, carpet pile, and lint entangled around
beater bar with a pair of scissors.
Remove beater bar (See BELT REPLACEMENT, pages 17, 18).
Remove any string or debris located on the end caps.
Reinstall beater bar and lower plate (See BELT REPLACEMENT,
pages 17, 18).
I) CLEANING EXTERIOR
Unplug mains lead from mains socket.
Clean exterior using a clean, soft cloth that has been
dipped in a solution of mild liquid detergent and water,
then wrung dry. DO NOT drip water on vacuum cleaner.
Wipe dry after cleaning.
To reduce static electricity and dust build-up, wipe outer
surface of vacuum cleaner.
MC-UL426
Electrical Shock And Personal Injury Hazard
Disconnect electrical supply before servicing or
cleaning the vacuum cleaner. Failure to do so could
result in electrical shock or personal injury from
vacuum cleaner suddenly starting.
- 20 -
WARNING
Advertisement
Table of Contents
