Disposal Disposing packaging Disposing the appliance Before disposing the appliance, remove the Make sure that any package, for example, dust bag and all the filters, and then dispose plastic bags, are kept out of the reach of them with normal household waste. children to avoid risk of suffocation.
IMPORTANT SAFETY INSTRUCTIONS FOR THE USER Before using the vacuum cleaner, please observe these basic safety instructions. Correct usage Do not use wet filters after wash, make This appliance is for indoor use with sure they are completely dry to avoid domestic purpose only and is not damaging the appliance.
Under no circumstances should either of these wires be connected to the A replacement fuse cover can be purchased earth terminal of the three pin plug, from your local Panasonic Dealer. marked with the letter E or the Earth Symbol WARNING...
Using the Appliance Operating the appliance Insert the connection pipe to suction Press the beater bar switch to run the inlet. Ensure that the 2 hooks of the beater bar anytime you need. connection pipe are completely fitted into the suction inlet. Suction inlet Beater bar switch Press the beater bar switch when the...
How to use the alternative Storing nozzles Perform the following before storing. When using the handle(quick draw handle), Turn off the appliance, and then please place the nozzle as shown. remove the plug from the socket outlet. Turn the upper cord storage hook in the upright position and wind the mains lead around the upper and lower cord storage hooks.
Page 8
How to empty the dust bin Close the dust bin plate until it clicks. Empty the dust bin in the following cases: When dust level reached the “MAX” line. When suction power has dropped. Grasp the dust bin handle on the top of the dust bin.
Maintenance Cleaning the floor nozzle WARNING Cut off any carpet pile and lint entangled around the beater bar for Remove the plug from the socket the floor nozzle with a pair of scissors. outlet before cleaning or maintaining the appliance. CAUTION Do not use detergent or any other Release the lower plate by rotating...
Cleaning Cleaning the dust bin Disassembly <Light care> Pull the buckles and pull up the dust Remove the dust by tapping the filter at bin handle. the corner of garbage can. Buckle Pull off the filter using the pull tab. (Pinch the pull tab and pull off the filter.) <Heavy care>...
Assembly Removing clogs Assemble the dust bin unit in reverse order When you feel the suction power is not of disassembly. adequate,check if the dust bin is full of dust or if the filters are clogged. Align the marks and turn the mesh filter as shown.
Clogged nozzle. Check for clogs.(see page Clogged hose. Check for clogs.(see page Hole in hose. Take to your nearest Panasonic Service Centre. Hose not inserted fully. Check hose connection. (see page 6) Dirty filters. Clean the dust bin. (see page 10) Replace a new HEPA exhaust filter.(see page 14)
Specifications Specifications MC-UL712 MC-UL710 Power source 230 - 240 V ~ 50 Hz Max. Input 1000 W Nominal input 920 - 980 W Dimensions (W x L x H) 303 mm x 280 mm x 1090 mm Net weight 5.8 kg 5.7 kg...
Using dust bags which are not those of 0844 844 3899 Panasonic will make the guarantee invalid. For customers within Ireland: Repairs should only be done by Panasonic 01289 8333 service persons or technicians. Otherwise For further support on your product, the guarantee will be invalid.