Table of Contents
Advertisement
B) PRE-FILTER CLEANING
1 1
LOCKED
(For Use)
UNLOCKED
(For Cleaning)
Make sure the dust bin is empty.
Grasp the dust bin handle and rotate
upper portion of dust bin to unlock (as
indicated on the lid), and lift off.
1 4
LOCKED
(For Use)
Rotate pre-filter clockwise to lock in
place.
1 2
UNLOCKED
(For cleaning)
Grasp pre-filter and rotate counter-
clockwise to remove.
Clean pre-filter by gently tapping over
a trash container.
Rinse with water only as needed, do
not use any detergent or soap.
Allow pre-filter to dry for 24 hours
before placing back into vacuum
cleaner.
1 5
LOCKED
(For Use)
UNLOCKED
(For Cleaning)
Reinstall upper portion of dust bin
and turn to locked position (as
indicated on the lid).
- 15 -
1 3
Tabs
Slots
To Reinstall:
Align the slot on the pre-filter with the
alignment tab inside dust bin.
Advertisement
Table of Contents
