Table of Contents
Advertisement
IP Camera Web-Client
Compression Settings
Setting
Options
Resolution
4CIF, 2CIF, CIF
Frame Rate
1–30
Priority
Quality, Bit Rate
Picture Quality
Best, Better, Good
Target Bit Rate
400–5000 kbps
(kbps)
GOP (No. of
1–100
Frames)
Audio Settings
Camera Setup
40
The quality of the video displayed can be configured as needed using the Compression
Settings. Use the following table to set up video compression.
Table 4-3
Compression Settings
Description
4CIF is the highest resolution and CIF is the lowest resolution.
The frame rate that is displayed per second. For NTSC, select from 1 fps
(lowest) to 30 fps (highest). For PAL, select from 1 fps (lowest) to 25 fps
(highest).
Choose the Priority selection based on user requirements. If you select
Quality, Target Bit Rate is greyed out and Picture Quality is activated. If
you select Bit Rate, Picture Quality is greyed out and Target Bit Rate is
activated.
When Quality is selected as the Priority, select the Picture Quality as
Good (lowest visual quality), Better, or Best (highest visual quality).
Enter the Target Bit Rate in kbps (kilobits per second) which represents
the amount of data processed per second.
Select the GOP (Group of pictures) number from 1 to 100.
The network camera supports bi-directional audio. There are two supported voice band
channels that function in full duplex mode. Connect industry standard line level audio input
and output to the back of your camera. See
information.
Audio configuration for your network camera is straightforward. To listen to or capture audio
from the camera, enable the Camera to Client (PC) check box (
to audio from the client (PC), enable the Client (PC) to Camera check box.
The Camera Setup view provides access to the settings used to configure the camera
functionality. The following section explains Auto Exposure and White Balance setup.
Connecting Audio
on page
20
for more
). To listen
Hide quick links:
Advertisement
Table of Contents
