Table of Contents
Advertisement
TCD340FX(e).book Page 59 Wednesday, June 8, 2005 3:57 PM
Transferring a call without speaking to
the handset user
1
During an outside call, press {x}, then
press the desired handset number.
L The in use indicator flashes to indicate
the outside call is on hold.
2
Press {s}.
L The outside call rings at the handset.
Note:
L If the handset user does not answer the
call within 1 minute, the call will ring at the
base unit again.
Between handsets
Example: When handset 1 transfers a call
to handset 2
1
Handset 1:
During an outside call, press {INT} and
{2} (desired handset number).
L The outside call will be put on hold.
L If there is no answer, press {INT} to
return to the outside call.
2
Handset 2:
Press {C} or {s} to answer the page.
L Handset 2 can talk with handset 1.
3
Handset 1:
To complete the call transfer, press
{ih}.
To establish a conference call, press
{3}.
Transferring a call without speaking to
the other handset user
1
During an outside call, press {INT}, then
press the desired handset number.
L k flashes to indicate the outside call
is on hold.
2
Press {ih}.
L The outside call rings at the other
handset.
Multi-unit Operation
Note:
L If the other handset user does not answer
the call within 1 minute, the call will ring at
your handset again.
59
Advertisement
Table of Contents
