Intercom Between Handsets; Transferring Calls Between Handsets, Conference Calls - Panasonic KX-TG9120FX Operating Instructions Manual

TG9120FX(e).book Page 50 Tuesday, August 29, 2006 9:44 AM
Multi-unit Operation
Increasing the range of the base
unit
You can increase the signal range of the
base unit by using a DECT repeater. Please
use only the Panasonic DECT repeater
noted on page 6. Consult your Panasonic
dealer for details.
Important:
L Before registering the repeater to this
base unit, you must turn the repeater
mode on.
L Do not use more than one repeater at a
time.
L You cannot make a monitoring connection
via a DECT repeater. (Cordless camera
KX-TGA914FX users only)
Setting the repeater mode
1
J (centre of joystick) i L i
L
2
"Other Options" i L
3
"Repeater Mode" i L
4
"On" i L i {ih}
Note:
L After turning repeater mode on or off, w
will flash on the handset momentarily. This
is normal. The handset can be used once
w stops flashing.
L While the repeater mode is turned on,
audible call announcements may not be
heard from the handset speaker.
Intercom between
handsets
Intercom calls can be made between
handsets in the same radio cell.
Example: When handset 1 calls handset 2
1
Handset 1:
50
{INT} i Select handset 2 (desired
handset number). i P / {C} / {s}
2
Handset 2:
Press {C} / {s} to answer.
3
When finished talking, press {ih}.
Transferring calls
between handsets,
conference calls
Outside calls can be transferred between 2
people in the same radio cell. 2 people in the
same radio cell can have a conference call
with an outside party.
Example: When handset 1 transfers a call
to handset 2
1
Handset 1:
During an outside call, press {INT}. i
Select handset 2 (desired handset
number). i P / {C} / {s}
L The outside call will be put on hold.
L If there is no answer, press {INT} to
return to the outside call.
2
Handset 2:
Press {C} / {s} to answer the page.
L Handset 2 can talk with handset 1.
3
Handset 1:
To complete the call transfer, press
{ih}.
To establish a conference call, press
w.
Transferring a call without speaking to
the other handset user
1
During an outside call, press {INT}. i
Select the desired handset number. i
P / {C} / {s}
L k flashes to indicate the outside call
is on hold.
2
{ih}