Making/Answering Calls; Making Calls Using The Handset - Panasonic KX-TCD340FX Operating Instructions Manual

TCD340FX(e).book Page 16 Wednesday, June 8, 2005 3:57 PM

Making/Answering Calls

Making calls using the
handset
1
Lift the handset and dial the phone
number.
L To correct a digit, press {C/T}, then
enter the correct number.
2
Press {C}.
3
When finished talking, press {ih} or
place the handset on the base unit.
Speakerphone
The handset features a digital
speakerphone, which allows you to have
hands-free conversations.
1
During a conversation, press {s} to turn
on the speakerphone.
L Speak alternately with the caller.
2
When finished talking, press {ih} or
place the handset on the base unit.
Note:
L For best performance, please note the
following:
– Use the speakerphone in a quiet
environment.
L To switch back to the receiver, press
{C}.
To adjust the receiver or speaker volume
Press {e} or {v} while talking. 4 volume
levels are available for the receiver. 6 levels
are available for the speaker.
Redial feature
Previously dialled phone numbers (each 24
digits max.) can be redialled.
To redial the last number dialled
Press q (right soft key), then press {C}
or {s}.
16
L If {s} is pressed, the unit will redial
automatically if the other party's line is
engaged.
Note:
L You can also press {C} or {s} before
pressing q.
To make a call using the redial list
The last 10 phone numbers dialled are
stored in the redial list.
1
Press q (right soft key).
L The last number dialled will be
displayed.
2
Press {e} or {v} repeatedly to select
the desired number.
L To exit the list, press {ih}.
3
Press {C} or {s}.
L If {s} is pressed, the unit will redial
automatically if the other party's line is
engaged.
To redial automatically
If you press {s} when redialling and the
other party's line is engaged, the unit will
redial the phone number again
automatically. The unit will redial up to 11
times. While the handset is waiting to redial,
{s} will flash. While the handset is
redialling, mute is automatically turned on.
Note:
L Automatic redial is cancelled when any
button (except q) is pressed.
L If mute does not turn off after the line is
connected, press {C/T}.
To edit a number in the redial list before
calling it
1
Press q (right soft key).
2
Press {e} or {v} repeatedly to select
the desired number, then press $.
3
Select "Edit and Call", then press
,.