Table of Contents
Advertisement
TCD340FX(e).book Page 12 Wednesday, June 8, 2005 3:57 PM
Preparation
Connections
When the AC adaptor is connected, a short
beep will be heard. If it is not heard, check
the connections.
(220–240 V, 50 Hz)
To telephone
network
Important:
L Use only the AC adaptor and telephone
line cord supplied with this unit.
Note:
L After connection, you must charge the
batteries to make or answer calls with the
handset (page 12).
L Never install telephone wiring during a
lightning storm.
L The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
12
of the adaptor may cause it to become
disconnected.
Battery installation
1
Hook
2
Note:
L Use only rechargeable batteries (page 6).
Battery charge
Place the handset on the base unit for
about 7 hours before initial use.
When charging, i and battery strength
icon are alternately shown on the display.
Insert the batteries negative (T)
terminal first.
Close the handset cover.
Advertisement
Table of Contents
