Making/Answering Calls; Making Calls; Answering Calls - Panasonic KX-TG4222C Operating Instructions Manual

Making calls

1
Lift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
2
Press M N.
3
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Using the speakerphone
1
Dial the phone number and press MZN.
R Speak alternately with the other party.
2
When you finish talking, press MOFFN.
Note:
R For best performance, use the
speakerphone in a quiet environment.
R To switch back to the receiver, press M
Adjusting the receiver or speaker
volume
Press MDN or MCN repeatedly while talking.
Making a call using the redial list
The last 5 phone numbers dialed are stored in
the redial list (each 48 digits max.).
1
MEN REDIAL
2
MbN: Select the desired phone number.
3
M N
Erasing a number in the redial list
1
MEN REDIAL
2
MbN: Select the desired phone number.
a MCLEARN
3
MbN: "Yes" a MOKN
4
MOFFN
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
TG422xC(en)_0122_ver011.pdf
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 17).
Example: If you need to dial the line access
number "9" when making outside calls with a
PBX:
1
2
Note:
R A 3.5 second pause is inserted each time

Answering calls

When a call is being received, the ringer
indicator flashes rapidly.
1
N.
2
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger. You do
not need to press M
on, see page 19.
Adjusting the handset ringer volume
n While the handset is ringing for an
n Programming the volume beforehand:
13

Making/Answering Calls

9 a MPAUSEN
Dial the phone number. a M
MPAUSEN is pressed.
Lift the handset and press M
when the unit rings.
R You can also answer the call by
pressing any dial key from 0 to 9,
*, or #. (Any key answer feature)
When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
N. To turn this feature
incoming call:
Press MDN or MCN repeatedly to select the
desired volume.
1
MMENUN
2
MbN: "Initial setting" a MOKN
3
MbN: "Ringer settings" a MOKN
4
MbN: "Ringer volume" a MOKN
5
MbN: Select the desired volume.
6
MOKN a MOFFN
2013/01/22 11:22:40
N
N or MZN
13