Table of Contents
Advertisement
1-2
1. Installing the Printer
Installation Site
To ensure utmost safety and prevent possible malfunction of the printer, install it in a location which
meets the following requirements.
N
A place away from a curtain or the like that may catch fire and burn easily.
N
An area where there is no possibility of being splashed with water or other types of liquid.
N
An area free from direct sunlight.
N
A place out of the direct air stream of an air conditioner, heater, or ventilator.
N
A well-ventilated place.
N
A dry place.
N
A dust-free location.
N
An area not subject to undue vibration.
N
A stable and level location.
N
A place where ammonia or other organic gas is not generated.
N
A place which does not put the operator in the direct stream of exhaust from the printer.
N
A place which is not near any kind of heating device.
Power Source
The power source voltage requirements are as follows:
N
Use a power source with little voltage fluctuation.
Voltage Fluctuation
Frequency Fluctuation : Within ± 0.3% (for U.S.A. and Canada)
Space Requirements
To ensure easy printer operation, supply replacements, and service maintenance, adhere to the
recommended space requirements detailed below. Allow a clearance of 150mm (6") or more at the back
of the printer as there is a ventilation duct.
230 (9)
2071 (81-1/2)
931 (36-3/4)
<With FN-3 and C-304L mounted>
Di620PE Operator's Manual
: Within ± 10% (for U.S.A. and Canada)
Specified voltage ± 10% (For EU)
Specified voltage ± 10% (For EU)
2831 (111-1/2)
735 (29)
405
(11-1/2)
1323 (52)
500
(19-3/4)
530
(16-3/4)
Unit: Metric (Inch)
823 (32-1/2)
4115O004AA
Advertisement
Table of Contents
