Saving documents
Specifying the document scanning size
The scanned area can be specified as a standard size. However, a portion of
a large document can be saved or a non-standard-sized document can be
saved as a standard size.
1
Touch [Quality & Reduction].
2
Touch [Reduction/Area], and then
touch [Original Size Set.].
–
"Zoom" has no effect with a Scan
to HDD operation, even if it has
been specified.
3
Select the desired scanning size, and
then touch [OK].
–
Touch [Auto Detect] to
automatically select the size
closest to the size of the
document. However, if the
document is smaller than Letter
size, Letter size is selected.
Note
Touch [Metric] to specify a metric size.
When data is saved, the settings return to their defaults.
bizhub 350/250 (Phase 2.5)
3
3-15