Konica Minolta BIZHUB 350 User Manual page 191

Specifying settings using PageScope Web Connection
5
Type in the current password and the new password, and then click
[Apply].
– If no password is to be specified for the user box, click [Apply]
without entering a password.
– If bit 4 of mode 469 is set to "1" in the Soft SW Setting screen, a
password that does not meet the password rules (contains 7 or less
characters or consists of the same character repeated) cannot be
specified. Specify a password that meets the password rules. For
details on specifying the software switch settings, refer to
"Specifying software switch settings (machine functions)" on
page 6-22.
bizhub 350/250 (Phase 2.5)
7
7-45