Lpr Printing; Operations On This Machine; Printer Driver Settings; For Windows 2000/Xp/Server 2003 - Konica Minolta BIZHUB 350 User Manual

4
4.5

LPR printing

The LPR print service is supported as standard in Windows 2000, Windows
XP, Windows NT 4.0, and Windows Server 2003. TCP/IP is used as the
network protocol.

Operations on this machine

Set the IP address for this machine. For the setting procedure, refer to
"Setting the IP address for this machine" on page 4-9.

Printer driver settings

For Windows 2000/XP/Server 2003

1
For Windows 2000, click the [Start] button, point to "Settings", and
then click "Printers".
For Windows XP/Server 2003, click the [Start] button, and then click
"Printers and Faxes".
– If "Printers and Faxes" does not appear in the Start menu, open the
Control Panel from the Start menu, select "Printers and Other
Hardware", and then select "Printers and Faxes".
2
Right-click the icon of the installed printer, and then click "Properties".
3
On the Ports tab, click the [Add Port] button.
4
In the "Available Printer Ports" list, select "Standard TCP/IP Port", and
then click the [New Port] button.
5
When the Add Standard TCP/IP Printer Port Wizard starts up, click the
[Next] button.
6
In the "Name of printer or IP address" box, enter the IP address for this
machine, and then click the [Next] button.
7
Select "Custom", and then click the [Settings] button.
8
Select "LPR", enter "Print" in the "Queue Name" box.
– The uppercase letters and lowercase letters must be entered
correctly.
4-16
Setting up network printing
bizhub 350/250 (Phase 2.5)