Konica Minolta BIZHUB 350 User Manual page 110

4
3
On the Network tab, click "Common Setting", then "AppleTalk".
4
Specify settings for the following:
– AppleTalk: Set whether to use AppleTalk. Select "Enable" here.
– Printer Name: Specify the printer name (up to 31 alphanumeric
characters and symbols, excluding = ~).
– Zone Name: Specify the zone being connected to (up to 31
alphanumeric characters and symbols, excluding = ~).
5
To apply the settings, restart this machine (turn the main power off,
then on again).
Reminder
When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The
machine may not operate correctly if it is turned on immediately after
being turned off.
4-42
Setting up network printing
bizhub 350/250 (Phase 2.5)