Konica Minolta BIZHUB 350 User Manual page 345

Various settings
Item
Enable NetWare
Frame Type
Bindery/NDS
Print Server Name
Print Server Password
Preferred File Server
Preferred NDS Context
Preferred NDS Tree
Print Queue Scan Rate
Mode
Printer Number
Reminder
To apply any changes to settings for "Enable NetWare", "Frame Type",
"Print Queue Scan Rate", "Mode", or "Printer Number", restart this
machine (turn the main power off, then on again).
When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The
machine may not operate correctly if it is turned on immediately after
being turned off.
bizhub 350/250 (Phase 2.5)
Description
Specify whether to enable NetWare.
Select the frame type.
Select Bindery/NDS.
Enter the print server name (up to 63 alphanumeric characters, ex-
cluding / ¥ : ; * [ ] < > | + = ?).
Specify the print server password (up to 63 alphanumeric characters
and symbols (spaces ! " # $ % & ' ~ = ¥ | ; : + * ` / ? @ _ - . , ( ) [ ] { }
< >)).(The password is displayed by "••••".) If changing the pass-
word, delete "****", and then input the password.
Enter the preferred file server name of bindery (up to 47 alphanumer-
ic characters, excluding / ¥ : ; , * [ ] < > | + = ?).
Enter the preferred NDS context name (up to 191 alphanumeric
characters, excluding / ¥ : ; , * [ ] < > | + = ?).
Enter the preferred NDS tree name (up to 63 alphanumeric charac-
ters, excluding / ¥ : ; , * [ ] < > | + = ?).
Enter the print queue scan rate (input range: 1-65535 seconds).
Select "PServer" or "NPrinter/RPrinter" as the operation mode of the
print server.
Enter the Nprinter/Rprinter printer number (input range: 0-255, 255
is automatically given).
11
11-81