Konica Minolta BIZHUB PRO 1050EP User Manual page 204

6
Troubleshooting
When a paper jam, SC-code (E-code, F-code) trouble or unloaded paper
occurs on either the master or tandem machine:
Remove the mishandled paper, take the appropriate troubleshooting meas-
ures to correct the problem, or add paper.
When the trouble is cleared, the machine will restart printing for the remain-
ing print quantity.
When memory overflow occurs on either the master or tandem ma-
chine:
On the master machine
The scanning job will stop immediately, and the tandem printing job will be
suspended on both machines. At this time, the tandem mode is not released.
Take the same measure to be applied for single machine referring to "If
"Memory Full" Message Is Displayed (Memory Overflow)" on page 16-12.
On the tandem machine
The tandem machine will start the tandem printing job when the memory be-
comes available after completing some reserve jobs.
If the memory of the tandem machine cannot be available despite the elapse
of time, the tandem mode will be released on the tandem machine.
When the power is turned off on either the master or tandem machine:
The tandem mode will be released automatically in either case. Restart the
procedure from the first step.
6-26
Setting Output Methods
bizhub PRO 1050P/1050eP