Removing Finished Sets From Large Capacity Stacker - Konica Minolta BIZHUB PRO 1050EP User Manual

4
4.10

Removing Finished Sets from Large Capacity Stacker

LS-501/502
The Large Capacity Stacker LS-501/502 can hold 5,000 output sheets (2,000
sheets for B5 and A5) at maximum.
Follow the procedure below to take out paper from the stacker.
1
Press the Paper removal button.
The stacker unit will move down to
the carriage.
2
Open the large capacity stacker
door.
!
Details
Once the stacker holds a sheet of out-
put paper, the large capacity stacker
door will be locked and cannot open till
the stacker unit goes down fully to the
carriage.
3
Withdraw the carriage by holding its
handle.
Reminder
Be sure to withdraw the carriage
straightforward, and do not change the
direction forcibly while driving it.
The carriage is for the exclusive use of carrying paper. Do not drive it in
any other use.
Never put yourself in the large capacity stacker.
4-30
Supplies & Handling
bizhub PRO 1050P/1050eP