Controller Nic Setting - Konica Minolta BIZHUB PRO 1050EP User Manual

Machine Manager Setting

13.5.2 02 Controller NIC Setting

Specify the controller settings. Various default settings or network settings
can be customized as required.
List of the Network Settings
Specify the settings for connecting a network printer, and the settings for
TCP/IP, RAW port numbers, IP Filter (permission/denial), and ping.
For details, refer to "01 TCP/IP" on page 13-65.
Specific setting and Description
01 TCP/IP
TCP/IP
Specify enable or disable TCP/IP.
DHCP
Specify enable or disable Dynamic Host Configuration
Protocol (DHCP). If
is automatically obtained from the DHCP server, in
which case it is not necessary to enter it.
IP Address
Specify the IP address.
Subnet Mask
Specify the subnet mask.
Default Gateway
Specify as required.
DNS Server1 to 3
Specify DNS server addresses.
DNS Host Name
Specify the DNS host name.
DNS Domain Name
Specify the DNS domain name.
LPD
When Enable
available.
Network Speed
Specify the network transfer rate.
TCP/IP RAW port settings (1 to 6)
Specify RAW port numbers and to be used or not.
TCP/IP Filter permission settings *
Specify to use the permission settings or not, and the
range in which to permit connections.
bizhub PRO 1050P/1050eP
Enable is selected, the IP address
is selected, LPD/LPR printing becomes
1
*
Setting options (italic: default)
Enable
Enable/
0.0.0.0 (0 - 255)
0.0.0.0 (0 - 255)
0.0.0.0 (0 - 255)
0.0.0.0 (0 - 255)
**********
Varied from machine to machine.
Max. 63 characters combining
symbols and alphanumerics can
be used.
Max. 63 characters combining
symbols and alphanumerics can
be used.
Enable
Auto Negotiation
plex/10M Full Duplex/100M Half
Duplex/100M Full Duplex
Use /Not Use
(Set between 1 - 65535.)
2
On/ Off
0.0.0.0 - 0.0.0.0 (0 - 255)
13
/Disable
Disable
/Disable
/10M Half Du-
13-53