Konica Minolta BIZHUB PRO 1050EP User Manual page 290

9
Procedure
1
Touch [Adjustment] - [02 Finisher Adjustment] - [03 Multi Folder (Fold)
Adj.].
2
Touch [05 Z-Fold Position Adjustment] to display the Z-Fold Position
Adjustment Screen.
3
Touch the [PRINT] tab to display the Print Screen.
4
Load the desired size of paper to be adjusted on a tray, specify [Z-
Fold], then press [Start]. A sample pattern (No. 16) will be output.
5
Check a distance (a) and distance (b) on the output sheet.
6
If the desired result cannot be obtained, touch the [ADJUSTMENT] tab.
7
Touch [Next] or [Back] to select the paper size to be adjusted.
Touching [Next] continuously will change the paper size as follows:
All - 11×17 - A3 - B4 - 8.5×14 - A4R - 8.5×11R - 8K - 12×18
9-48
2
1
a
Paper feed
direction
b
bizhub PRO 1050P/1050eP
Adjustment