Konica Minolta BIZHUB PRO 1050P User Manual page 298

PPD Printer Driver setting (Mac OS 9)
Date/Time
Specify the pages to print the date and time.
- All pages:
Date/Time is printed in all the pages.
- Front Cover Only:
Date/Time is printed in the 1st page only
Tandem Mode
Using two copiers (master copier and sub copier), prints can be made at the
same time under the same printing conditions. When printing a large number
of copies, time required to complete the job can be shortened.
When either one of the two copiers is equipped with a print controller, tan-
dem printing can be performed. When both of the copiers are equipped with
a print controller, the copier which receives the printing job instruction func-
tions as the master copier and the other one is the sub copier.
For the tandem printing, the two copiers should be connected by either
method as follows.
- Connect the two copiers directly with a cross cable. In this case, the net-
work functions cannot be used.
- Connect them with a straight cable via HUB.
Note
Use a cross cable or straight cable higher than the category type 5.
Tandem printing should only be set up by your authorized service repre-
sentative.
Refer to the "User Manual (Copier)" for more information about Tandem
Mode.
bizhub PRO 1050 Printer Controller
7
7-39