Konica Minolta BIZHUB PRO 1050P User Manual page 17

1
FCC Regulation
7 WARNING
This equipment has been tested and found to comply with limits for a
Class B digital device, pursuant to part 15 of FCC rules. These limits are
designed to provide reasonable protection against harmful interference
in a residential area.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more of the following meas-
ures:
% Reorient or relocate the receiving antenna.
% Increase the distance between the equipment and the receiver.
% Connect the equipment to an outlet on a circuit other than the circuit to
which the receiver is connected.
% Consult your dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Regulations
This Class B digital apparatus complies with Canadian ICES-003.
Patent Notice
The product includes an implementation of LZW licensed under U.S.Patent
4,558,302.
Built-in Fonts
The print controller includes support for PCL5e/6 Language (HP PCL clone)
and includes the 88 built-in Agfa Microtype fonts. For a complete list, refer to
"Font" on page 10-3.
When equipping PostScript kit, the print controller also includes support for
Adobe PostScript 3 (PS3) and includes the 136 built-in Adobe fonts. For a
complete list, refer to "Font" on page 10-3.
1-4 bizhub PRO 1050 Printer Controller
Introduction