Konica Minolta BIZHUB PRO 1050P User Manual page 226

KONICA MINOLTA PS Printer Driver setting (Windows)
Output - Output Method - Wait Mode/Proof and Print
Outputs the test printing and checks the current setting from the control pan-
el of copier. Use this when printing a large volume document, such as multi-
ple sets of pages.
Using the Wait Mode, you can store a print job in the copier built-in hard disk
as image and can output it again when required.
1
Open the file to be printed and select [File] - [Print] of application.
2
Click [Properties] to open the [Print-
ing Preferences] window.
3
Select [Wait Mode] or [Proof and Print] in the [Output Method].
4
Click [OK] to close the [Printing Preferences] window.
5
Click [Print] to perform printing from the application.
– When [Wait Mode] is selected, it stops without being printed.
– When [Proof and Print] is selected, only one set is printed and it
stops.
– When the Mode Check screen is not displayed, press [MACHINE]
tab.
On the copier's control panel, the Mode Check screen appears.
6
Confirm the current settings. If you
do not change any setting, proceed
to the step 9.
bizhub PRO 1050 Printer Controller
6
6-39