Konica Minolta BIZHUB PRO 1050P User Manual page 136

PCL Printer Driver Setting (Windows)
Font Settings - Font Name
You can select only one font per watermark from the list shown by clicking
the [,].
Font Settings - Style
You can select style from the list shown by clicking the [,].
- When [Regular] is selected, normal formatting will be applied to your se-
lected watermark text.
- When [Bold] is selected, bold formatting will be applied to your selected
watermark text.
- When [Italic] is selected, italic formatting will be applied to your selected
watermark text.
- When [Bold Italic] is selected, bold italic formatting will be applied to your
selected watermark text.
Font Settings - Size
Selects a point size for the font to be used in your watermark by clicking the
[,] or [+] or by entering the size from the keyboard directly.
Text Angle - Degrees
Controls the "lean" angle of the watermark by sliding this control bar back
and forth or by typing a number in the text value box from -90 degrees to 90
degrees.
Position
Controls the position of the watermark on the page by using the vertical and
horizontal slider.
Center
Returns the position of the Current Watermark to the center of the paper.
Text Density
You can control the "density" of the watermark text with this slider. If you
slide this to the right, the "density" of the watermark text will be darker. If you
slide this to the left, it will be lighter.
bizhub PRO 1050 Printer Controller
4
4-59