Konica Minolta BIZHUB PRO 1050P User Manual page 182

PPD Printer Driver setting (Windows)
Transparency Interleave
Set this item when using the transparency interleave as the paper.
Select either [Printed] or [Blank].
- Printed:
This is set when inserting the printed interleaf for the transparent sheet.
- Blank:
This is set when inserting the blank interleaf for the transparent sheet.
Paper Tray/Transparency Interleave
Uses to select the paper tray for Transparency Interleave.
Paper Tray/Transparency Interleave cannot be set in the following cases:
- When the [Transparency] is not selected in the [Paper/Quality] tab - [Me-
dia]
- When the [Paper Sources] is not selected in the [Device Settings] tab -
[Installable Options]
Wait Mode
Outputs the test print and checks the current setting from the control panel
of copier. Use this when printing a large volume document, such as multiple
sets of pages.
Using the Wait Mode, you can store a print job in the copier built-in hard disk
as image and can output it again when required.
1
Open the file to be printed and select [File] - [Print] of application.
2
Click [Properties] to open the [Print-
ing Preferences] window and then
click [Advanced].
3
Click [,] besides the [Wait Mode] to display the list. Then select [Wait
Mode] or [Proof and Print] and click [OK] to close the [Advanced Op-
tions] window.
bizhub PRO 1050 Printer Controller
5
5-33