Saving documents
3.3
Saving sent/received faxes in boxes
When receiving faxes
When faxes are received, the data is saved in the following boxes depending
on the fax status and the sender's settings.
Saving destination
Memory RX User Box
When sending faxes
A box can be treated as a destination when sending faxes. Boxes can be reg-
istered as destinations in the address book from the Utility mode, or a box
can be specified by using the Direct Input tab when the fax is sent.
The following procedure describes how to specify a box as a destination and
how to use the Direct Input tab.
Reminder
A bulletin board user box can also be specified as a box destination. For
details, refer to the User manual [Facsimile Operations].
bizhub C300
Description
Received documents can be force-saved into the memory
and printed when desired.
The list of received documents is referred to as the force
memory reception box.
3
3-11