7
Input Account Procedure (A-2)
1
Call the Administrator Mode to the Display.
❍
Calling the Administrator Mode to the Display (p.7-16)
2
Making sure that "Ad-" appears on
the Display, enter "1" from the Key
Pad.
3
Press the [START] key.
4
Making sure that "A--" appears on
the Display, enter "2" from the Key
Pad.
5
Press the [START] key.
6
Enter the 3-digit account number
from the Key Pad.
Do you know the restrictions on
?
entering the account number?
➜
The account number must be in
three digits ranging from 001 to
999.
➜
If an account number entered already exists, the entry will be
rejected. Enter a different number.
7
Press the [START] key.
This stores the account number.
Tip
To program another account number successively, repeat steps 4
through 7.
7-20
Using the Utility Mode
Konica 7115/7118