Programmed Playback (Program) - Silvercrest KH 6778 Operating Instructions Manual

If there are folders: With this function you can compile
your own music programme by selecting certain titles
within the current sub-folder for playback. You can decide
the sequence in which the titles are played.
➧ To operate the "Programmed Playback" function please
refer to Chapter "Programmed Playback (Program)".
Single Track
If there are no folders: The currently selected title is
played once again.
If there are folders: The currently selected title in the
current sub-folder is played once.
Repeat Single
If there are no folders: Playback of the currently selected
title is repeated.
If there are folders: Playback of the currently selected ti-
tle in the current sub-folder is continuously repeated until
termination by pressing the "Stop" button twice.
To select the Play Modes ....
1
In the event that a CD-R/CD-RW with MP3 or WMA files
is being played, then playback is terminated by pressing
the "Stop" button on the front of the DVD Player or on
the remote control once.
2 Press the control button
titles of a sub-folder (the mark is therefore in the right-
hand half of the CD-R menu; see fig. 1). The mark will
then change to the mode select bar; the preset "Folder
Normal" mode has been selected (see fig. 2).
ROOT 0
Folder 1 1
Folder 2 2
Mode
Fig. 1
ROOT 0
Folder 1 1
Folder 2 2
Mode
Fig. 2
3 One of the Play Modes is displayed with each depres-
sion of the "OK" button. When the required play mode
is displayed, then leave the mode select bar by pressing
once whilst in the list of the
CD-R MENU
..
Volume 1 – Title 1 1
Volume 2 – Title 2
Folder Normal
CD-R MENU
..
Volume 1 – Title 1
Volume 2 – Title 2
Folder Normal
the control button
located in the list of the titles of the previously selected
sub-folder.
4 Proceed as follows to playback titles in the set mode ...
If there are no folders:
• Press the "Play" button once to start playback of the
first tile on the CD-R/CD-RW
• Press the "OK" button once to start playback at the cur-
rently selected title.
If there are folders:
• Press the "Play" button once to start playback of the
first title in the current sub-folder
• Press the "OK" button once to start playback of the cur-
rently selected title in the current sub-folder.

Programmed playback (Program)

Set the "Program Begin" mode to select several titles for pro-
grammed playback:
1 The field "Program __:__" is faded in above the CD-R
menu. Select the first titles to be programmed with the
control buttons and
If there are folders: Titles can only be selected for pro-
grammed playback from the currently selected sub folder
of the CD-R/CD-RW. Titles from different sub-folders can-
not be selected for programmed playback.
2 Confirm the selected titles by pressing the "OK" button
on the remote control.
0
3
The selected title is displayed as the first stored title for
programmed playback in the faded-in file above the CD-
2
R menu – e.g. "Program 1:05" if the fifth title of the cur-
rently selected sub-folder was selected as the first title
for programmed playback.
4
Repeat the steps 1 and 2 until all the required titles have
been selected for programmed playback.
0
5 Then press the control button
1
mode select bar.
2
6
Press the "OK" button once; the "Program End" mode is
displayed in the mode select bar.
7 Press the control button
menu.
once. The mark is then once again
or
or
on the remote control.
once to change the
once to return to CD-R
Silvercrest KH 6778 41