Table of Contents
Advertisement
Playing Media with
Your DVD Player
Inserting a DVD/CD
To play a disc or file with your DVD player:
•
Power the DVD player, TV set and any other
external equipment on.
•
The DVD player will show the Silvercrest start
screen.
•
If no disc has been inserted into the DVD
player's disc tray the message "No disc" will be
shown.
•
Press the OPEN/CLOSE button (21) on the
remote control or the DVD player's front panel
(3) to open the disc tray. "Open" is displayed on
the screen.
•
Load the disc with the label facing up on the disc
tray. For double-sided discs, insert the side to be
played downwards.
•
Once you have inserted the disc, press the
OPEN/CLOSE button (21) on the remote control
or the DVD player's front panel (3) to close the
disc tray.
•
The disc contents will be read, this may take a
few seconds. "Loading" is displayed on the
screen.
•
The playback of DVD Video discs and Audio
CDs starts automatically. For ISO DVDs
containing files the File Browser will open.
•
DVDs, VCDs and SVCDs that you want to play
back may include a region code that you'll find
on the DVD box. The DVD will only play
DVDs/VCDs/SVCDs with the region code 2.
•
Depending on the inserted DISC OR FILE it is
possible that the contents do not play
automatically but a selection menu will be
displayed. In this case, press the Direction
buttons on the remote control to select the menu
item allowing movie playback to start. To start
movie playback, press the ENTER (11) or PLAY
(29) button on the remote control.
Pausing Playback
•
To pause playback of the inserted DISC OR
FILE, press the PLAY/PAUSE button (6) of
the DVD player's front panel or on the remote
control (29) during playback.
•
The message "Pause" will be shown on the TV
screen, and on the display (2) on the DVD
player's front panel you will see the elapsed
playtime.
•
The screen will shown the still picture of the
paused scene.
•
Press PLAY/PAUSE again: playback starts
automatically from the point where you
stopped.
29
Advertisement
Table of Contents
