Setting The Sound Level Of The Speakers; Starting The Dvd Player - Silvercrest KH 6778 Operating Instructions Manual

If the "OK" button is pressed once again at 5.4 meters/18
ft, then the display is returned to the minimum selectable
distance setting of 0.3 meters/1 ft.
Info:
Every increase of the distance setting in 0.3-meter
increments equals a delay of one millisecond. When
optimally set, the sound from all directions will reach
the point of hearing at the same time.
Having selected a setting for "Front L", proceed in thefol-
lowing manner:
18
Select one after the other the options "Front R", "Center",
"Rear L" and "Rear R" with the control button
with each option the distance between the speaker and
the point of hearing with the "OK" button.
Info:
The distance of the subwoofer in relation to the point
of listening cannot be set because the human ear is
unable to locate spatially (in stereo) the lower frequen-
cies reproduced by the subwoofer, thus making the
distance setting in relation to the point of listening
superfluous.
19
After having selected a setting for "Rear R", thereby con-
cluding all settings in the "Distance" menu sub-item, leave
the "Distance" menu sub-item by pressing the control
button five times.

Setting the sound level of the speakers

20
Select the "Level" menu sub-item by pressing the control
button once. The options for "Distance" menu sub-item
will then be displayed on the television screen:
Audio
Language Video
Size Distance
Front L
Front R
Center
Rear L
Rear R
Subwoofer
21 Select the "Front L" option for the front L speaker of the
audio component by pressing the control
once.
22
Press the "OK" button to adjust the sound level of the
Front L speaker in 1-dB increments between 6 dB and
–6 dB. The sound level changes with each depression of
the "OK" button.
23
Please note:
If you are not sure which setting is right for you, then
; select carry out this setting from your point of listening while
playing a DVD/VCD/S-VCD. Try out all settings until
you have found a sound pattern that you consider
to be optimal.
24
25

10. Starting the DVD Player

Having ...
•
•
•
More Aud Parental
•
Level
0 dB
0 dB
•
0 dB
0 dB
0 dB
... then the DVD-Player will be ready to operate
0 dB
button
If the "OK" button is depressed once again at –6 dB, then
the maximum selectable sound level of 6 dB will once
again be displayed.
Having selected the setting for "Front L", proceed in the
following manner:
Select one after the other the "Front R", "Center", "Rear L",
"Rear R" and "Subwoofer" options with the control button
; select the required sound level for each option with
the "OK" button.
After you have selected the setting for "Subwoofer", there-
by concluding all settings in the "Level" menu sub-item,
leave the "Level" menu sub-items by pressing the control
button six times.
The speaker settings have now been completed. Press
the "Setup" button once to fade out the OSD menu.
set up the DVD Player at an appropriate point
connected the DVD Player to the television (or video
projector) with one of the listed connecting facilities
connected the DVD Player (if required) to an HiFi or sur-
round-sound system or a Dolby Digital or DTS Receiver
ensured that the remote control is operational by loading
the batteries
and know how to call and operate the settings menu
with the remote control
Silvercrest KH 6778 19