Table of Contents
Advertisement
Radio and AC cord connections
Included parts to be used
AM loop antenna
1
Connect the antennas.
AM loop antenna
Stand the antenna up on its base.
Place the antenna where reception is best.
Keep loose antenna cable away from other wires
and cables.
Push up.
Insert the antenna
cables fully.
White
Red
2
Connect the AC power supply cord.
AC IN terminal
Back of the main unit
AC power supply cord
FM indoor antenna
Loosen the terminal with a
Phillips-head screwdriver.
Black
Tighten the
terminal screw
again.
To household AC outlet
(AC 120 V, 60 Hz)
AC power supply cord
Click!
Back of the main unit
Conserving power
The main unit consumes a small amount of power, even when it is
turned off (approx. 3.6 W). To save power when the unit is not to be
used for a long time, unplug it from the household AC outlet.
Set the unit to standby mode and remove the AC power supply
cord after "BYE" disappears from the unit's display.
You will need to reset some memory items in the unit after plugging.
Note
The included AC power supply cord is for use with this unit only.
Do not use it with other equipment. Also, do not use cords for
other equipment with this unit.
11
FM indoor antenna
Affi x this end of
the antenna where
reception is best.
Adhesive tape
Advertisement
Table of Contents
