Television Operation; Set Clock Manually; Adjust Time Zone - Panasonic SC-RT50 Operating Instructions Manual

Television operation

You can operate the TV through the unit's remote control.
While pressing [ TV], enter the code with the
numbered buttons.
e.g., 0250: [0]  [2]  [5]  [0]
Manufacturer and Code No.
Panasonic 0051/
National 0250
QUASAR
FISHER 0154
GE 0047
GOLDSTAR 0178/0317/0457
HITACHI 0145
JVC 0053
LG 0178/0317/0457
MAGNAVOX 0054
MITSUBISHI 0150
Test by turning on the television ([ TV]) and changing channels
([  CH]) after pressing [TV]. Repeat the procedure until you fi nd the
code that allows correct operation.
This setting is retained.
Operating the television
1
Press [TV] to switch the remote control to operate the
television.
2 Operate the television by pressing [ TV] (turn on/off the
television), [INPUT] (input select), [  CH] (channel select)
or [ VOLUME] (adjust the volume).
 When operating this unit, press [THEATER] to switch the remote control.
 If your television brand is not listed or if the code listed for your
television does not allow control of your television, this remote
control is not compatible with your television.
When other Panasonic products respond to this
remote control
When other Panasonic products placed nearby affect this unit's
remote control, change the remote control code on the main unit and
the remote control (the two must match).
Use "1", the factory set code, under normal circumstances.
To change the code on the main unit
While stopped
1
Press [SETUP].
2
Press [, ] to select "Setup" and press [].
Press [, ] to select "Remote Control
Code" and press [ENTER].
Press [, ] to select the code ("1", "2"
or "3") and press [ENTER].
Remote Control Code
Setup
Press " " and "ENTER" together
for more than 2 seconds on the remote.
Channel
Setup
Disc
Video
To change the code on the remote control
While pressing [ENTER], press and hold
the numbered button ([1], [2] or [3]) for
more than 2 seconds.
Press [ENTER].
 When the following indicator appears on the unit's display
To return to the previous screen
Press [RETURN].
PHILIPS (RC-5) 0054
RCA 0047
SAMSUNG 0060/0587/0702
SANYO 0154
SHARP 0093/0165
SONY 0000
SYLVANIA 0054
THOMSON 0047
TOSHIBA 0156
ZENITH 0017
Press and hold [ENTER]
and the indicated number
button at the same time for
more than 2 seconds.
To exit the screen
Press [SETUP].

Set Clock Manually

In the case of a power failure, the clock setting remains in memory
for approximately 1 minute.
While stopped
1
Press [SETUP].
Press [, ] to select "Setup" and
2
press [].
Press [, ] to select "Clock Settings"
and press [ENTER].
Press [, ] to select "Set Clock
Manually" and press [ENTER].
Set Clock Manually
Setup
Month Day Year Hour Minute
1 / 1 / 2000 12
Channel SAT
Setup
Disc DST
Off
Video
Audio
Press [, ] to select the item you
want to change and press [, ] to
change the setting.
 DST (Daylight Saving Time): On or Off
If you select "On", the clock is advanced one hour starting
at 2 a.m. on the fi rst Sunday in April and ending at 2 a.m. on
the last Sunday in October.
 Time Zone shows the time difference from Greenwich Mean
Time (GMT).
EST (Eastern Standard Time)
CST (Central Standard Time)
MST (Mountain Standard Time) = GMT –7
PST (Pacifi c Standard Time)
AST (Alaska Standard Time)
HST (Hawaii Standard Time)
Press [ENTER].
The clock starts.

Adjust Time Zone

Adjust the time zone (–1 or +1) if it was not set correctly with auto
clock setting.
You can set this menu only after "Set Clock Automatically" is
completed.
While stopped
1
Press [SETUP].
2
Press [, ] to select "Setup" and press
[].
Press [, ] to select "Clock Settings"
and press [ENTER].
Press [, ] to select "Adjust Time
Zone" and press [ENTER].
Press [, ] to select "–1" or "+1" and
press [ENTER].
To return to the previous screen
Press [RETURN].
To exit the screen
Press [SETUP].
15
: 00
AM
Time Zone
DST, Time Zone ( below)
EST EST
= GMT –5
= GMT –6
= GMT –8
= GMT –9
= GMT –10