Other Settings; Play Menu - Panasonic SC-HT340 Operating Instructions Manual

Using on-screen menus (continued)

Other Settings

Play Speed
To change play speed
– from "x0.6" to "x1.4" (in 0.1-unit steps)
• Press [ 3, PLAY] to resume normal playback.
• After you change the speed.
• This function may not work depending on the

7 Play Menu

Repeat (Only when the elapsed play time can be
displayed.)
During playlist play: Off → Scene → Playlist
Off → Content → Group
A-B Repeat
Except
To repeat a specifi ed section
Press [ENTER] at the starting and ending
points.
Press [ENTER] again to cancel.
Marker
Except
To mark up to 5 positions to play again
Press [ENTER]. (The unit is now ready to accept
markers.)
To mark a position:
To mark another position:
To recall a marker:
To erase a marker:
• This feature does not work during program
• Markers you add are cleared when you
Advanced
Disc Review
still picture part and when playing a play list)
Allows you to browse the disc contents and
start playing from the selected position. You
can select either "Intro Mode" or "Interval Mode"
in "Advanced Disc Review" in the "Disc" tab
(\ page 22).
Example:
Press [3, PLAY] when you fi nd a title or
program of your choice.
• This may not work depending on the disc and
* 1
For Southeast Asia, Thailand, the Middle East, South Africa, Saudi Arabia and Kuwait
20
RQT8043
– Dolby Pro Logic II and Sound Enhancement
have no effect.
– Audio output switches to 2-channel stereo.
– Sampling frequency of 96 kHz is converted
to 48 kHz.
disc's recording.
: Off → Chapter → Title
*
: Off → Program → All
: Off → Track → All
:
*
: Off → Group
*
"All" is displayed during program or random
play.
(Still picture part)
Press [ENTER] at the desired point.
Press [2, 3] to select "✱" \ Press [ENTER]
Press [2, 3] \ Press [ENTER]
Press [2, 3] \ Press [CANCEL]
and random play.
open the disc tray or switch the main unit to
standby.
(Except +R/+RW)
the play position.
7 Picture Menu
Picture Mode Normal
Video Output
Mode * 1
Transfer
Mode * 1
(Except
Cinema1 : Mellows images and enhances
detail in dark scenes.
Cinema2 : Sharpens images and enhances
detail in dark scenes.
Animation : Suitable for animation.
Dynamic : Enhances the contrast for powerful
images.
User : Press [ENTER] to select "Picture
Adjustment" (\ see below)
Picture Adjustment
Contrast : Increases the contrast
between light and dark parts
of the picture.
Brightness : Brightens the picture.
Sharpness : Adjusts the sharpness of the
edges of horizontal lines.
Colour : Adjusts the shade of the
picture's color.
Gamma : Adjusts the brightness of
dark parts.
Depth Enhancer : Reduces the rough noise
in the background to give a
greater feeling of depth.
To select suitable picture quality with your
television
*
480p/576p (progressive)
* 480i/576i (interlace)
*
When you select "xxx p" (progressive) and
a confi rmation screen appears, select "Yes"
only if connecting to a progressive output
compatible television.
* The numbers displayed depend on the disc
being played. One of the above numbers is
displayed.
If you have chosen "xxx p" (progressive)
( see above), select the method of
conversion for progressive output to suit the
type of material.
• The setting will return to Auto or Auto1 when
the disc tray is opened, the unit is turned off
or another source is selected.
When playing PAL discs, MPEG4 or DivX video
contents
Auto : Automatically detects the fi lm and
video content, and appropriately
converts it.
Video : Select when using Auto, and the
content is distorted.
Cinema : Select this if the edges
of the fi lm content
appear jagged or
rough when Auto
is selected.
However, if the video content is
distorted as shown in the illustration
to the right, then select Auto.
When playing NTSC discs
Auto1 : Automatically detects the fi lm and
video content, and appropriately
converts it.
Auto2 : In addition to Auto1, automatically
detects fi lm contents with different frame
rates and appropriately converts it.
Video : Select when using Auto1 and Auto2,
and the content is distorted.