Calibration Log; Reflectometer Mode - Hand Held Products Quick Check ImageData Barcode Verifier Quick Check 890 User Manual

Calibration Log

The Calibration Log records the instances when reflectance calibration was
performed. It records the Date/Time set on your PC, serial number of the QC890
Verifier being calibrated, and the name and location of the operator. To access
the Calibration Log, click on Settings -> Calibration -> Calibration Log.
You will be prompted to enter a password. The password can be either the
Master Password (visions07) or a password you previously set.
The Calibration Log looks like this:

Reflectometer Mode

Note: The Reflectometer Mode is only available for use with the mouse/pen
wands. It is important to perform reflectance calibration prior to using any
pen or mouse wand.
Reflectometer Mode measures the spot reflectance of the area at which the
imager is "looking."
3 - 6 Quick Check® 890 User's Guide